ImageDev

AxisPropagationLabelWithSeeds3d

Simulates the propagation through a phase of a three-dimensional image and computes a label image representing separately the connected and unconnected voxels of this phase.

Access to parameter description

For an introduction: This algorithm simulates the propagation in a user-defined phase of a volume, along user-defined axis and direction. Generally, the analyzed phase represents the porosity inside a material and the purpose of this algorithm is to study if this void space is connected through the volume.

A label output image represents the connected and disconnected areas: The last slice can only contain values 0 or 2.

A measurement output object contains statistics about the connected and disconnected areas of the selected phase through the volume.

The maskAndSeedValues and maximumThreshold parameters identify areas of the image in which propagation can be done; therefore, it allows identifying non-porous areas.

Propagation is performed from the seeds, along the user defined axis, through voxels of intensity X verifying the following four conditions: In the binary case, the maskAndSeedValues and maximumThreshold are ignored. The propagation does not reject any specific value, propagates through 0 intensity values and stops on 1 intensity values. It amounts to considering maskAndSeedValues at [2, 0] and maximumThreshold at 0.

See also

Function Syntax

This function returns a AxisPropagationLabelWithSeeds3dOutput structure containing the outputLabelImage and outputMeasurement output parameters.
// Output structure.
struct AxisPropagationLabelWithSeeds3dOutput
{
    std::shared_ptr< iolink::ImageView > outputLabelImage;
    AxisPropagationLabel3dMsr::Ptr outputMeasurement;
};

// Function prototype.
AxisPropagationLabelWithSeeds3dOutput
axisPropagationLabelWithSeeds3d( std::shared_ptr< iolink::ImageView > inputImage,
                                 iolink::Vector2i32 maskAndSeedValues,
                                 int32_t maximumThreshold,
                                 AxisPropagationLabelWithSeeds3d::Axis axis,
                                 AxisPropagationLabelWithSeeds3d::PropagationDirection propagationDirection,
                                 std::shared_ptr< iolink::ImageView > outputLabelImage = NULL,
                                 AxisPropagationLabel3dMsr::Ptr outputMeasurement = NULL );
This function returns a tuple containing the output_label_image and output_measurement output parameters.
// Function prototype.
axis_propagation_label_with_seeds_3d( input_image,
                                      mask_and_seed_values = [255, -1024],
                                      maximum_threshold = 128,
                                      axis = AxisPropagationLabelWithSeeds3d.Axis.Z_AXIS,
                                      propagation_direction = AxisPropagationLabelWithSeeds3d.PropagationDirection.MIN_TO_MAX,
                                      output_label_image = None,
                                      output_measurement = None )
This function returns a AxisPropagationLabelWithSeeds3dOutput structure containing the outputLabelImage and outputMeasurement output parameters.
/// Output structure of the AxisPropagationLabelWithSeeds3d function.
public struct AxisPropagationLabelWithSeeds3dOutput
{
    public IOLink.ImageView outputLabelImage;
    public AxisPropagationLabel3dMsr outputMeasurement;
};

// Function prototype.
public static AxisPropagationLabelWithSeeds3dOutput
AxisPropagationLabelWithSeeds3d( IOLink.ImageView inputImage,
                                 int[] maskAndSeedValues = null,
                                 Int32 maximumThreshold = 128,
                                 AxisPropagationLabelWithSeeds3d.Axis axis = ImageDev.AxisPropagationLabelWithSeeds3d.Axis.Z_AXIS,
                                 AxisPropagationLabelWithSeeds3d.PropagationDirection propagationDirection = ImageDev.AxisPropagationLabelWithSeeds3d.PropagationDirection.MIN_TO_MAX,
                                 IOLink.ImageView outputLabelImage = null,
                                 AxisPropagationLabel3dMsr outputMeasurement = null );

Class Syntax

Parameters

Class Name AxisPropagationLabelWithSeeds3d

Parameter Name Description Type Supported Values Default Value
input
inputImage
The input grayscale, binary, or color image. In the case of a binary image, the background represents the phase where the propagation has to be performed. Image Binary, Label or Grayscale nullptr
input
maskAndSeedValues
The first value is a mask value. Voxels with this intensity value are not infiltrated by the propagation. The second value is the seed value. Voxels with an intensity value lower than this seed value are not infiltrated by the propagation. A value lower than the second value of maskAndSeedValues or greater or equal to maximumThreshold is ignored. This parameter is ignored in binary case, and then is forced to [2, 0]. Vector2i32 Any value {255, -1024}
input
maximumThreshold
The maximum propagation intensity value. Voxels having an intensity value greater or equal to this value are rejected by the propagation. This parameter is ignored in binary case, and is forced to 1. Int32 Any value 128
input
axis
The axis along which the propagation is performed.
X_AXIS The propagation is performed along the X axis.
Y_AXIS The propagation is performed along the Y axis.
Z_AXIS The propagation is performed along the Z axis.
Enumeration Z_AXIS
input
propagationDirection
The direction in which the propagation is performed.
MIN_TO_MAX The propagation is performed from the first to the last slice index.
MAX_TO_MIN The propagation is performed from the last to the first slice index.
Enumeration MIN_TO_MAX
output
outputLabelImage
The binary output image representing the propagation within the selected phase. A void image means that there is no connection through the selected axis. Its dimensions are forced to the same values as the input. Image nullptr
output
outputMeasurement
The output measurement result. AxisPropagationLabel3dMsr nullptr

Object Examples

auto foam_sep = readVipImage( std::string( IMAGEDEVDATA_IMAGES_FOLDER ) + "foam_sep.vip" );

AxisPropagationLabelWithSeeds3d axisPropagationLabelWithSeeds3dAlgo;
axisPropagationLabelWithSeeds3dAlgo.setInputImage( foam_sep );
axisPropagationLabelWithSeeds3dAlgo.setMaskAndSeedValues( {255, -1024} );
axisPropagationLabelWithSeeds3dAlgo.setMaximumThreshold( 128 );
axisPropagationLabelWithSeeds3dAlgo.setAxis( AxisPropagationLabelWithSeeds3d::Axis::X_AXIS );
axisPropagationLabelWithSeeds3dAlgo.setPropagationDirection( AxisPropagationLabelWithSeeds3d::PropagationDirection::MIN_TO_MAX );
axisPropagationLabelWithSeeds3dAlgo.execute();

std::cout << "outputLabelImage:" << axisPropagationLabelWithSeeds3dAlgo.outputLabelImage()->toString();
std::cout << "poreVolume: " << axisPropagationLabelWithSeeds3dAlgo.outputMeasurement()->poreVolume( ) ;
foam_sep = imagedev.read_vip_image(imagedev_data.get_image_path("foam_sep.vip"))

axis_propagation_label_with_seeds_3d_algo = imagedev.AxisPropagationLabelWithSeeds3d()
axis_propagation_label_with_seeds_3d_algo.input_image = foam_sep
axis_propagation_label_with_seeds_3d_algo.mask_and_seed_values = [255, -1024]
axis_propagation_label_with_seeds_3d_algo.maximum_threshold = 128
axis_propagation_label_with_seeds_3d_algo.axis = imagedev.AxisPropagationLabelWithSeeds3d.X_AXIS
axis_propagation_label_with_seeds_3d_algo.propagation_direction = imagedev.AxisPropagationLabelWithSeeds3d.MIN_TO_MAX
axis_propagation_label_with_seeds_3d_algo.execute()

print( "output_label_image:", str( axis_propagation_label_with_seeds_3d_algo.output_label_image ) );
print( 
print("poreVolume: ", axis_propagation_label_with_seeds_3d_algo.output_measurement.pore_volume( ) ) );
ImageView foam_sep = Data.ReadVipImage( @"Data/images/foam_sep.vip" );

AxisPropagationLabelWithSeeds3d axisPropagationLabelWithSeeds3dAlgo = new AxisPropagationLabelWithSeeds3d
{
    inputImage = foam_sep,
    maskAndSeedValues = new int[]{255, -1024},
    maximumThreshold = 128,
    axis = AxisPropagationLabelWithSeeds3d.Axis.X_AXIS,
    propagationDirection = AxisPropagationLabelWithSeeds3d.PropagationDirection.MIN_TO_MAX
};
axisPropagationLabelWithSeeds3dAlgo.Execute();

Console.WriteLine( "outputLabelImage:" + axisPropagationLabelWithSeeds3dAlgo.outputLabelImage.ToString() );
Console.WriteLine( "poreVolume: " + axisPropagationLabelWithSeeds3dAlgo.outputMeasurement.poreVolume( ) );

Function Examples

auto foam_sep = readVipImage( std::string( IMAGEDEVDATA_IMAGES_FOLDER ) + "foam_sep.vip" );

auto result = axisPropagationLabelWithSeeds3d( foam_sep, {255, -1024}, 128, AxisPropagationLabelWithSeeds3d::Axis::X_AXIS, AxisPropagationLabelWithSeeds3d::PropagationDirection::MIN_TO_MAX );

std::cout << "outputLabelImage:" << result.outputLabelImage->toString();
std::cout << "poreVolume: " << result.outputMeasurement->poreVolume( ) ;
foam_sep = imagedev.read_vip_image(imagedev_data.get_image_path("foam_sep.vip"))

result_output_label_image, result_output_measurement = imagedev.axis_propagation_label_with_seeds_3d( foam_sep, [255, -1024], 128, imagedev.AxisPropagationLabelWithSeeds3d.X_AXIS, imagedev.AxisPropagationLabelWithSeeds3d.MIN_TO_MAX )

print( "output_label_image:", str( result_output_label_image ) );
print( "poreVolume: ", result_output_measurement.pore_volume( ) );
ImageView foam_sep = Data.ReadVipImage( @"Data/images/foam_sep.vip" );

Processing.AxisPropagationLabelWithSeeds3dOutput result = Processing.AxisPropagationLabelWithSeeds3d( foam_sep, new int[]{255, -1024}, 128, AxisPropagationLabelWithSeeds3d.Axis.X_AXIS, AxisPropagationLabelWithSeeds3d.PropagationDirection.MIN_TO_MAX );

Console.WriteLine( "outputLabelImage:" + result.outputLabelImage.ToString() );
Console.WriteLine(  "poreVolume: " + result.outputMeasurement.poreVolume( )  );