ImageDev

AxisPropagationLabel3d

Simulates the propagation through a phase of a three-dimensional image and computes a label image representing separately the connected and unconnected voxels of this phase.

Access to parameter description

For an introduction: This algorithm simulates the propagation in a user-defined phase of a volume along a user-defined axis. Generally, the analyzed phase represents the porosity inside a material and the purpose of this algorithm is to study how this void space is connected through the volume.

A label output image represents the connected and disconnected areas: The first and last slice can only contain values 0 or 2.

A measurement output object contains statistics about the connected and disconnected areas of the selected phase through the volume.

The maskAndSeedValues and maximumThreshold parameters identify areas of the image in which propagation can be done; therefore, it allows identifying non-porous areas.

Propagation is performed from the seeds, along the user defined axis, through voxels of intensity X verifying the following four conditions: In the binary case, the maskAndSeedValues and maximumThreshold are ignored. The propagation does not reject any specific value, propagates through 0 intensity values and stops on 1 intensity values. It amounts to considering maskAndSeedValues at [2, 0] and maximumThreshold at 0.

See also

Function Syntax

This function returns a AxisPropagationLabel3dOutput structure containing outputLabelImage and outputMeasurement. 
// Output structure of the axisPropagationLabel3d function.
struct AxisPropagationLabel3dOutput
{
    /// The binary output image representing the propagation within the selected phase. A void image means that there is no connection through the selected axis. Its dimensions are forced to the same values as the input.
    std::shared_ptr< iolink::ImageView > outputLabelImage;
    /// The output measurement result.
    AxisPropagationLabel3dMsr::Ptr outputMeasurement;
};

// Function prototype
AxisPropagationLabel3dOutput
axisPropagationLabel3d( std::shared_ptr< iolink::ImageView > inputImage,
                        iolink::Vector2i32 maskAndSeedValues,
                        int32_t maximumThreshold,
                        AxisPropagationLabel3d::Axis axis,
                        std::shared_ptr< iolink::ImageView > outputLabelImage = nullptr,
                        AxisPropagationLabel3dMsr::Ptr outputMeasurement = nullptr );
This function returns a tuple containing output_label_image and output_measurement. 
// Function prototype.
axis_propagation_label_3d(input_image: idt.ImageType,
                          mask_and_seed_values: Iterable[int] = [255, -1024],
                          maximum_threshold: int = 128,
                          axis: AxisPropagationLabel3d.Axis = AxisPropagationLabel3d.Axis.Z_AXIS,
                          output_label_image: idt.ImageType = None,
                          output_measurement: Union[Any, None] = None) -> Tuple[idt.ImageType, AxisPropagationLabel3dMsr]
This function returns a AxisPropagationLabel3dOutput structure containing outputLabelImage and outputMeasurement. 
/// Output structure of the AxisPropagationLabel3d function.
public struct AxisPropagationLabel3dOutput
{
    /// 
    /// The binary output image representing the propagation within the selected phase. A void image means that there is no connection through the selected axis. Its dimensions are forced to the same values as the input.
    /// 
    public IOLink.ImageView outputLabelImage;
    /// The output measurement result.
    public AxisPropagationLabel3dMsr outputMeasurement;
};

// Function prototype.
public static AxisPropagationLabel3dOutput
AxisPropagationLabel3d( IOLink.ImageView inputImage,
                        int[] maskAndSeedValues = null,
                        Int32 maximumThreshold = 128,
                        AxisPropagationLabel3d.Axis axis = ImageDev.AxisPropagationLabel3d.Axis.Z_AXIS,
                        IOLink.ImageView outputLabelImage = null,
                        AxisPropagationLabel3dMsr outputMeasurement = null );

Class Syntax

Parameters

Parameter Name Description Type Supported Values Default Value
input
inputImage
The input grayscale, binary, or color image. In the case of a binary image, the background represents the phase where the propagation has to be performed. Image Binary, Label or Grayscale nullptr
input
maskAndSeedValues
The first value is a mask value. Voxels with this intensity value are not infiltrated by the propagation. The second value is the seed value. Voxels with an intensity value lower than this seed value are not infiltrated by the propagation. A value lower than the second value of maskAndSeedValues or greater or equal to maximumThreshold is ignored. This parameter is ignored in binary case, and is forced to [2, 0]. Vector2i32 Any value {255, -1024}
input
maximumThreshold
The maximum propagation intensity value. Voxels having an intensity value greater or equal to this value are rejected by the propagation. This parameter is ignored in binary case, and is forced to 1. Int32 Any value 128
input
axis
The axis along which the propagation is performed.
X_AXIS The propagation is performed along the X axis.
Y_AXIS The propagation is performed along the Y axis.
Z_AXIS The propagation is performed along the Z axis.
Enumeration Z_AXIS
output
outputLabelImage
The binary output image representing the propagation within the selected phase. A void image means that there is no connection through the selected axis. Its dimensions are forced to the same values as the input. Image nullptr
output
outputMeasurement
The output measurement result. AxisPropagationLabel3dMsr nullptr
Parameter Name Description Type Supported Values Default Value
input
input_image
The input grayscale, binary, or color image. In the case of a binary image, the background represents the phase where the propagation has to be performed. image Binary, Label or Grayscale None
input
mask_and_seed_values
The first value is a mask value. Voxels with this intensity value are not infiltrated by the propagation. The second value is the seed value. Voxels with an intensity value lower than this seed value are not infiltrated by the propagation. A value lower than the second value of maskAndSeedValues or greater or equal to maximumThreshold is ignored. This parameter is ignored in binary case, and is forced to [2, 0]. vector2i32 Any value [255, -1024]
input
maximum_threshold
The maximum propagation intensity value. Voxels having an intensity value greater or equal to this value are rejected by the propagation. This parameter is ignored in binary case, and is forced to 1. int32 Any value 128
input
axis
The axis along which the propagation is performed.
X_AXIS The propagation is performed along the X axis.
Y_AXIS The propagation is performed along the Y axis.
Z_AXIS The propagation is performed along the Z axis.
enumeration Z_AXIS
output
output_label_image
The binary output image representing the propagation within the selected phase. A void image means that there is no connection through the selected axis. Its dimensions are forced to the same values as the input. image None
output
output_measurement
The output measurement result. AxisPropagationLabel3dMsr None
Parameter Name Description Type Supported Values Default Value
input
inputImage
The input grayscale, binary, or color image. In the case of a binary image, the background represents the phase where the propagation has to be performed. Image Binary, Label or Grayscale null
input
maskAndSeedValues
The first value is a mask value. Voxels with this intensity value are not infiltrated by the propagation. The second value is the seed value. Voxels with an intensity value lower than this seed value are not infiltrated by the propagation. A value lower than the second value of maskAndSeedValues or greater or equal to maximumThreshold is ignored. This parameter is ignored in binary case, and is forced to [2, 0]. Vector2i32 Any value {255, -1024}
input
maximumThreshold
The maximum propagation intensity value. Voxels having an intensity value greater or equal to this value are rejected by the propagation. This parameter is ignored in binary case, and is forced to 1. Int32 Any value 128
input
axis
The axis along which the propagation is performed.
X_AXIS The propagation is performed along the X axis.
Y_AXIS The propagation is performed along the Y axis.
Z_AXIS The propagation is performed along the Z axis.
Enumeration Z_AXIS
output
outputLabelImage
The binary output image representing the propagation within the selected phase. A void image means that there is no connection through the selected axis. Its dimensions are forced to the same values as the input. Image null
output
outputMeasurement
The output measurement result. AxisPropagationLabel3dMsr null

Object Examples

auto foam_sep = readVipImage( std::string( IMAGEDEVDATA_IMAGES_FOLDER ) + "foam_sep.vip" );

AxisPropagationLabel3d axisPropagationLabel3dAlgo;
axisPropagationLabel3dAlgo.setInputImage( foam_sep );
axisPropagationLabel3dAlgo.setMaskAndSeedValues( {255, -1024} );
axisPropagationLabel3dAlgo.setMaximumThreshold( 128 );
axisPropagationLabel3dAlgo.setAxis( AxisPropagationLabel3d::Axis::X_AXIS );
axisPropagationLabel3dAlgo.execute();

std::cout << "outputLabelImage:" << axisPropagationLabel3dAlgo.outputLabelImage()->toString();
std::cout << "poreVolume: " << axisPropagationLabel3dAlgo.outputMeasurement()->poreVolume( ) ;

foam_sep = imagedev.read_vip_image(imagedev_data.get_image_path("foam_sep.vip"))

axis_propagation_label_3d_algo = imagedev.AxisPropagationLabel3d()
axis_propagation_label_3d_algo.input_image = foam_sep
axis_propagation_label_3d_algo.mask_and_seed_values = [255, -1024]
axis_propagation_label_3d_algo.maximum_threshold = 128
axis_propagation_label_3d_algo.axis = imagedev.AxisPropagationLabel3d.X_AXIS
axis_propagation_label_3d_algo.execute()

print("output_label_image:", str(axis_propagation_label_3d_algo.output_label_image))
print("poreVolume: ", str(axis_propagation_label_3d_algo.output_measurement.pore_volume()))

ImageView foam_sep = Data.ReadVipImage( @"Data/images/foam_sep.vip" );

AxisPropagationLabel3d axisPropagationLabel3dAlgo = new AxisPropagationLabel3d
{
    inputImage = foam_sep,
    maskAndSeedValues = new int[]{255, -1024},
    maximumThreshold = 128,
    axis = AxisPropagationLabel3d.Axis.X_AXIS
};
axisPropagationLabel3dAlgo.Execute();

Console.WriteLine( "outputLabelImage:" + axisPropagationLabel3dAlgo.outputLabelImage.ToString() );
Console.WriteLine( "poreVolume: " + axisPropagationLabel3dAlgo.outputMeasurement.poreVolume( ) );

Function Examples

auto foam_sep = readVipImage( std::string( IMAGEDEVDATA_IMAGES_FOLDER ) + "foam_sep.vip" );

auto result = axisPropagationLabel3d( foam_sep, {255, -1024}, 128, AxisPropagationLabel3d::Axis::X_AXIS );

std::cout << "outputLabelImage:" << result.outputLabelImage->toString();
std::cout << "poreVolume: " << result.outputMeasurement->poreVolume( ) ;

foam_sep = imagedev.read_vip_image(imagedev_data.get_image_path("foam_sep.vip"))

result_output_label_image, result_output_measurement = imagedev.axis_propagation_label_3d(foam_sep, [255, -1024], 128, imagedev.AxisPropagationLabel3d.X_AXIS)

print("output_label_image:", str(result_output_label_image))
print("poreVolume: ", str(result_output_measurement.pore_volume()))

ImageView foam_sep = Data.ReadVipImage( @"Data/images/foam_sep.vip" );

Processing.AxisPropagationLabel3dOutput result = Processing.AxisPropagationLabel3d( foam_sep, new int[]{255, -1024}, 128, AxisPropagationLabel3d.Axis.X_AXIS );

Console.WriteLine( "outputLabelImage:" + result.outputLabelImage.ToString() );
Console.WriteLine(  "poreVolume: " + result.outputMeasurement.poreVolume( )  );